Skip to main content

The benefits of painting your metal roof


Metal roofs and metal roof cladding options are getting a significant amount of press these days, perhaps because they are one of the best roofing solutions in an era that is continually focused on sustainability. Metal roofing systems are cheaper to design, manufacture, and install than their traditional counterparts. Cold metal roofing options reduce solar heat gain, reducing annual cooling costs, and the strength of metal roofing makes them extremely affordable in the long run.

Painting a metal roof is one of the best ways to preserve the benefits of your metal roof throughout its useful life, including valuable cost savings.

roof painting


Please note: if you have an older metal roof, understand that painting it is not a one-size-fits-all metal roofing solution. It is best to have a contractor familiar with metal building construction inspect it and let you know if the paint will suffice or if the roof needs to be replaced.

The following are some of the advantages of painting your metal roof.

Sustainability. We will start with sustainability because the statistics on cold metal roof systems and energy efficiency are impressive. See the following facts below:

  • Due to the heat island effect (heat radiating back into the atmosphere from roofs, concrete, asphalt, etc.) can make an urban area 6 ° F to 8 ° F hotter than the areas around the surrounding field. Light colored and / or reflective metal roof coatings can mitigate the heat island effect.
  • These same reflective properties also prevent passive solar heat gain, reducing your dependence on a cooling system. In hot climates, this difference can lead to a 50% reduction in utility costs.
  • A high-quality roof can last more than twice as long as traditional roofing materials and often comes with a warranty of up to 40 years. This significantly reduces repair and replacement costs. These savings increase with routine repainting to protect the structural integrity of the roof.
  • Steel construction products use more recycled materials before and after consumption than any other product. Furthermore, they can be recycled at the end of their life cycle.

Longer roof life = bigger savings. Your metal roof is more affordable out of the box and the cost savings continue throughout its life. As long as you choose the right roof design and finish coatings early on, your roof will outperform traditional roofing products and that will put money back in your pockets. If you have an old metal roof and its integrity is not compromised, your new coat of paint will increase its life and reduce energy consumption.

metal roof painting

Improved aesthetics. There are almost as many colors of metal roof painting options as there are exterior paint colors for your home or business. Choose a color that matches your home or neighborhood color palette or one that blends more in with the natural environment. When your business park or business district is receiving an overhaul, choose a matching roof paint shade. You can also use bright colors to assist your building stand out in brick and mortar traffic, otherwise you can paint your roof with the corporate logo or colors for better brand recognition.

These tips can help you have a successful experience when you are ready to repaint your metal roof.

  • Buy specific coatings for roofs. Don't use leftover paint from your house on your metal roof. Metal roof coatings and paints are made up of different materials and therefore the wrong type of paint will erode quickly, leaving your building in danger of irreparable moisture damage.
  • Use a sealant. Always use a sealer before applying metallic paint to your roof. You want to shield your roof as completely as possible from moisture penetration that ends up in rust and erosion.
  • Use energy efficient paint. There is no reason not to use energy efficient paint. Even if it costs a little more, the difference will more than pay for itself in a year or two.
  • Use correct application methods. Not putting enough paint on the roof, or applying it incorrectly, will diminish your benefits. Follow the manufacturer's instructions to the letter or hire professionals to do the job for you. Again, paying a little more is worth high-quality work.

Your metal roof should be inspected at least once or twice a year so that you can be on the lookout for any potential problems. On average, metal roofs need to be repainted every 10 years or so, although the time between painting depends on the type of paint and the manufacturer. When in doubt, have your roof inspected.

Contact Amazing Roof Restoration for more information on energy efficient paint products for your metal roof.

Comments

Popular posts from this blog

Frequently Asked Questions About Physiotherapist

Transcend Health want there to be no doubt with the physiotherapy treatments. Here we give you the opportunity to find the answers to your questions, all doubts regarding physiotherapy, your problem or a specific treatment of those carried out by the team of physiotherapist newcastle. 1.What is a physiotherapist? Physiotherapist newcastle have a university education and are experts in treating lesions of the musculoskeletal system and other alterations caused by pathologies that affect other systems. His work is based on health promotion, rehabilitation and physiotherapy treatment. They are also physiotherapy experts in prescribing physical exercise in the fields of health and sports. 2.What do i need to bring? Transcend Health will need your medical or surgical history. If you have them and they are relevant you can take your analysis / MRI reports, and the list of medications. You may be advised to wear shorts and a shirt. 3.How many visits will I need? The nu

How to avoid work accidents in your company?

All jobs are exposed to most accidents and this trend keeps increasing. This happens mainly because of 3 reasons: ignorance, little to no training and lack of awareness or involvement of both company and the workers. How can you make your company a safe place and not lose money with accidents at work? Before moving on to the topic at hand today, I would like to point out that the associated costs associated with the lack of occupational risk prevention in companies are very high. Another day we will speak at length about it. Now, let's look at the basics and essentials that you need to put in place to have a safe, healthy and competitive company. It seems logical that companies should be a safe place to work, but not all companies take care of that "small" detail (irony 100%). Are you one of the companies that is affected by the accident rate? We’re going to show you 8 keys that you can apply from today to prevent and reduce the number of accidents in your company.

Reasons to have Precision Farming Technology

Technology is developing and advancing rapidly, and the agricultural industry is not far behind. As more and more farmers grapple with the latest technology, this article gives you reasons why you should have the most accurate and up-to-date technology in the world. Process Simplification With the use of technology, many processes have been simplified. From monitoring crops with unmanned drones to robots that do the planting for you. There are thousands of ways to apply technology on farms to simplify farmers' lives. Compatibility and Communication Outdated machinery on farms is not as effective (or not effective at all) when it comes to storing important precision data. Using the latest technologies, the systems often work together or in parallel to store vital information. Keeping technology up to date allows your tools to figure out what to do and keeps machines reactive to the environment around them. Time saving One of the buzzwords in precision agriculture technol